05-23-2009 10:56 PM - edited 03-06-2019 05:54 AM
HI all,
Error on initialize VLAN database 1: VTP feature not yet initialized[OK]
Anybody know what this error means.
Device running WS-C2950G-48-EI in Transparent VTP mode. Help me how can I solve this problem.
Thank You,
Ramesh
05-24-2009 04:48 AM
post the ouput of "show vlan"
05-24-2009 04:57 AM
05-26-2009 03:59 AM
Since your vlan database has over 30 vlans and there are no issues, I would ignore the error.
HTH>
05-26-2009 07:32 AM
I would too, but sometimes this switch is malfunctioning, even I could not log-in the switch. the buffer log shows :
*Sep 9 23:29:49.894 NST: %SYS-2-MALLOCFAIL: Memory allocation of 259644 bytes failed from 0x803B719C, alignment 0
Pool: Processor Free: 0 Cause: Not enough free memory
Alternate Pool: I/O Free: 136388 Cause: Not enough free memory
05-26-2009 07:33 AM
how long has it been up for? sometimes a reboot fixes all!
05-26-2009 09:11 AM
Hi Andrew,
First time when I found this problem, it has been up since Sep 9.
Exactily sometimes a reboot fixes all the problem and start works like a normal switch.
Ramesh
05-26-2009 01:54 PM
Hi Ramesh,
I think your VLAN database is corrupt.
1. Delete the vlan.dat file
2. Enter the VLAN Database again.
3. Exit to save a new database.
See if this helps.
05-26-2009 10:25 PM
Hi Leo,
I will, but does this make permanent solution.
Ramesh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: