Double-ring for outside calls on VG224 SCCP analog phone

Unanswered Question

I have many skinny-controlled, VG224-connected, analog phones in a CUCM 6.1(2) environment. They do NOT double-ring to indicate an outside call vs. an inside call. (The IP phones do). Is there a particular command that has to be done on the VG224 ring double-pulse for outside calls?


I've dug but cannot find anything.


THANKS!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (2 ratings)
Loading.
Rob Huffman Sun, 05/24/2009 - 09:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Michael,


I have checked every VG224 doc that I can find and it doesn't look like Distinctive Ringing is supported :(


Check out the Supplementary Services;


http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html


Hope this helps! It's a bummer

Rob



PS: I have worked with some other NetPros who could not enable this feature with the VG224 :(

giftonabel Tue, 12/01/2009 - 00:31
User Badges:

You can have this feature activated by changing the required cptone, eg cptone IN, you can upgrade the VG224 IOS to vg224-i6s-mz.150-1.M.bin


or you can apply the command " ring cadence external " on the voice-port.


rgds,

Gifton

Actions

This Discussion