replacing a 2602 router

Answered Question
May 24th, 2009
User Badges:

We currently have an old Cisco 2602 route and have been advised we should replace it with a Cisco 1841 Router. Is this a valid unit to replace the 2602 with?

Thanks.

Correct Answer by Giuseppe Larosa about 7 years 12 months ago

Hello Wayne,

in this case I would use a C1841.



Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Giuseppe Larosa Sun, 05/24/2009 - 22:57
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Wayne,

yes a C1841 can be a replacement for a C2602.


Depending on your needs other possible choices are possible (also cheaper).


for example for a simple ADSL access with NAT also a C877 could be a good choice if you have only few users.


if you provide more details on what the C2602 has done up to now, number of users and so on you can get better help.



Hope to help

Giuseppe



grazicgrazic Mon, 05/25/2009 - 20:31
User Badges:

Thanks Giuseppe.

We have about 600 users with the C2602 as the internet facing unit connected via 10mb pipe. I think it is just stopping DOS. Unit is working fine, just getting worried because of its age, are talking about increasing the pipe and we are increasing numbers.

Thanks.

Correct Answer
Giuseppe Larosa Tue, 05/26/2009 - 01:39
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Wayne,

in this case I would use a C1841.



Hope to help

Giuseppe


Actions

This Discussion