I am experiencing very strange behavior of RTP stream from IP cameras (different vendors - D-LINK [cheap] and AXIS [expensive]).
I can get a video from camera in to ways.
!
1. MJPEG Stream - I use these type of links in Safari or FireFox:
http://admin:admin@192.168.0.251/video/mjpg.cgi !!!TCP
or
http://192.168.21.250/axis-cgi/mjpg/video.cgi?resolution=640x480 !!!TCP
And this is working excellent. The Picture is great. But it consumes a lot of expensive traffic.
!
2. MPEG4 stream - I use these types of urls in VLC, QuickTime or RealPLayer:
rtsp://192.168.0.251:554/640 !!!UDP
or
rtsp://192.168.21.250:554/mpeg4/media.amp !!!UDP
Sometime (very seldom and the picture is very unstable) I have a picture and sound, more often I do not see any picture but I hear broken sound.
At the same time the smae MPEG4 stream (rtsp://192.168.x.x:554) is working perfect if I am getting it from local lan PCs (where camera resides). But i have troubles with it outside local LAN (via tunnels).
Here is my net schema:
CAMERA - CAT2950 - C2811-IPSEC VTY via Internet (10 Mbits/s)-C3845-PIX-CAT3750-PC (VLC, QuickTime, RealPlayer)
or
CAMERA - CAT2960 - C1751V-GRE Tunnel via Internet (10 Mbits/s)-C2621XM-CAT2950-MAC (VLC, QuickTime, RealPlayer).
Also I have very similar schemas - but in all cases RTP is not working.
Something is going wrong with UDP packets during GRE/IPSEC encapsulation. But I do not know what. Please Help.
Thank you.
P.S. here is sample tunnel config, the are all similar :
interface Tunnel80
description IPsec to TOM via Comstar
bandwidth 2000
ip address 10.10.110.81 255.255.255.252
qos pre-classify
tunnel source 89.175.xx.xx
tunnel destination 77.236.xx.xx
tunnel mode ipsec ipv4
tunnel protection ipsec profile KM4
or
interface Tunnel55
description GRE to SKL via Comstar
bandwidth 10000
ip address 10.10.110.53 255.255.255.252
qos pre-classify
keepalive 3 3
tunnel source 89.175.xx.xx
tunnel destination 213.33.xx.xx
