***********************Calls rejected************************

Unanswered Question
May 25th, 2009
User Badges:

Hi Pros

The following dial-peer keeps rejected all the calls- I means I got busy tone:

dial-peer voice 86008 voip

description -- send to OpenSER

translation-profile outgoing voip_toll_range_204


destination-pattern 40345088..$

progress_ind setup enable 3

voice-class codec 1

session protocol sipv2

session target sip-server

dtmf-relay rtp-nte

playout-delay nominal 250

playout-delay mode fixed

ip qos dscp cs5 media

no vad


We use this dial-peer for GrandStream analog adapter. My sip server shows that the phone 8843 is resgistred with the server and downloaded the proper firmare. However, my PRI GW keep denis the calls. There an ouput from the PRI GW

Time elapsed since last clearing of voice call statistics never

Connect Time = 3303358, Charged Units = 0,

Successful Calls = 4, Failed Calls = 71, Incomplete Calls = 0

Accepted Calls = 64, Refused Calls = 0,

Last Disconnect Cause is "39 ",

Last Disconnect Text is "bearer capability not authorized (57)",

Last Setup Time = -1512913577.

: 4034508843 Digits: 11

I called my PSTN service provider, they said that they send us the call and our PRI denies it.

Any ideas why the PRI denies these calls?

Thanks in advance,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Mon, 05/25/2009 - 10:45
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

To know, take debug isdn q931 and debug ccsip message with term mon.

CrazyDonJuan Mon, 05/25/2009 - 11:04
User Badges:

I enable debug isdn q931 and debug ccsip all then I called the number; however, there is no debuging message. And of course, type terminal monitor since I telnet to the device.

paolo bevilacqua Mon, 05/25/2009 - 11:06
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Check "show log", level logging to console can have been changed.


This Discussion