**************Set number of the ring in fxs port**********************

Unanswered Question
May 25th, 2009
User Badges:

Hi Pros,

Can I set how many time a phone connected to a fxs has to ring?

I am trying to forward this number to a voicemail server. Eventhough I have a dial-peer to forward the call,but the FXS keeps ring.

For example, I want to forward the call to voicemail after 5 rings.

1. Have the remote router which the fxs card. Set the number on the port and a Dial-peer to send the call to the voice gw.

2. Voice gateway with 2 dial-peer with different preference number.First dial-peer send call to the remote router(lower preference number).Second dial-peer with higher pref number send the calls to the voicemail server.

My questions: How can I instruct the fxs card to send the call to voicemail?

There are the dial-peers

1.voice gw


dial-peer voice 2013 voip

preference 1

destination-pattern 6046779391

session target ipv4:x.x.x(remote ID)

dtmf-relay h245-signal

ip qos dscp cs5 media

no vad



dial-peer voice 20131 voip

preference 2

destination-pattern 6046779391

progress_ind setup enable 3

translate-outgoing calling 12

no translate-outgoing called 11

voice-class codec 2

session protocol sipv2

session target ipv4:x.x(voice server IP)

dtmf-relay rtp-nte

playout-delay nominal 250

playout-delay mode fixed

ip qos dscp cs5 media

no vad

Remote router dial-peer

dial-peer voice 700 voip

preference 9

destination-pattern 6046779391

translate-outgoing calling 2

translate-outgoing called 2

session target ipv4:x(Voice gw IP)

dtmf-relay cisco-rtp

ip qos dscp cs5 media

no vad


dial-peer voice 304 pots

max-conn 1

destination-pattern 604677

port 0/2/0


Hope i have enough info,

Thanks in advance,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Tue, 05/26/2009 - 07:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Already replied in another thread, please do not post duplicates.


This Discussion