Cisco 851 - Issue connecting to Internet through SDM 2.5

Unanswered Question
May 26th, 2009

We purchased a Cisco 851 and are having some issues getting it configured for one of our clients using SDM 2.5 loaded through the router.

We have it set with a static IP, with Static DNS.

We would prefer to use the SDM instead of CLI for reasons per the client. We can not get the router to connect to the internet. We think it is due to not being able to locate a field to input the Default Gateway. Our last try was putting the gateway in the IP route field which after researching seemed to be something to try.

We are connecting through a Insight Business Cable broadband connection.

Attached is a export of the SDM config settings. We are new to deploying Cisco Routers with this interface and any help you could give on this matter would be greatly appreciated. If you need any additional information please let me know.

Thanks,

Chad

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion