Password Recovery on Unity Express CLI

Answered Question
May 26th, 2009

I can access Unity Express on the GUI, but I am unable to log into a CLI session on the service-module - GUI administrator login does not work.


How can I recover the CLI username/password?

Correct Answer by Brandon Buffin about 7 years 9 months ago

Are you running AAA on the router? Can you create a local user on the router and try to login with this username/password?


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (4 ratings)
Loading.
Brandon Buffin Tue, 05/26/2009 - 07:53

Are you being asked for a username/password after "service-module service-enging 0/0 session"? If so, check the line for the CUE module. In your router config, along with "line vty 0 4", etc you will have something similar to "line 194". Is this line set to require a login? If so, remove the login command.


Hope this helps.


Brandon

clark-computers Wed, 05/27/2009 - 00:09

No login command, I'm afraid. Here's my line config:


line con 0

no modem enable

line aux 0

line 2

no activation-character

no exec

transport preferred none

transport input all

line vty 0 4

access-class 23 in

transport input ssh

line vty 5 100

access-class 23 in

transport input ssh


Stu

Brandon Buffin Wed, 05/27/2009 - 04:38

Are you trying to get to the CUE module CLI from the router? Are you being prompted for username/password after "service-module service-enging 0/0 session"? Is it prompting for username/password or just password?


Brandon

Correct Answer
Brandon Buffin Wed, 05/27/2009 - 05:53

Are you running AAA on the router? Can you create a local user on the router and try to login with this username/password?


Brandon

Networkservices... Thu, 06/16/2016 - 16:43

I'm facing similar issue, however its Prompting just the Password.

Any help is highly appreciated.

Brandon Buffin Fri, 06/17/2016 - 05:20

Did you check your line configuration? For example:

line 194
login
transport preferred nonetransport input all


Do you see the "login" command as above? If so, remove this command using "no login"

Brandon

Actions

This Discussion