SIP Trunking question

Answered Question
May 26th, 2009
User Badges:
  • Cisco Employee,

Im configuring SIP trunk to a generic ITSP,  this ITSP not use the SIP default port (5060), but the SIP configuration on CCA doesn't allow to specify or change the SIP port.


Is there any way in CCA to Change the default port, or what is the way to do that in CLI mode?

Correct Answer by Steven DiStefano about 7 years 11 months ago

Try to look in the CLI for the 'SIP-Server' statement put in by CCA and adjust the port (do a no and reenter)...


sip-ua
sip-server ipv4:208.40.50.60:5060

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Steven DiStefano Tue, 05/26/2009 - 08:49
User Badges:
  • Blue, 1500 points or more

Try to look in the CLI for the 'SIP-Server' statement put in by CCA and adjust the port (do a no and reenter)...


sip-ua
sip-server ipv4:208.40.50.60:5060

Actions

This Discussion