05-26-2009 02:25 PM - edited 03-18-2019 10:22 AM
I have a 3640 with a WIC1T serial module in the WIC slot. Is it possible to configure a chanellised T1 for voice on this interface. Or do I have to use a channelised T1 WIC. I will be connecting this interface to another 3640 with the same interface using a rolled serial cable. One router will act as a branch office voice router the other router will be an configured as an ISDN switch.
Andy
Solved! Go to Solution.
05-26-2009 03:21 PM
You are welcome. Please remember to rate useful posts with the scrollbox below.
05-26-2009 02:58 PM
No, you cannot use that for ISDN or channelized T1. You will need a specific channelized interface to do that.
05-26-2009 03:02 PM
Thankyou for the clarification.
Andy
05-26-2009 03:21 PM
You are welcome. Please remember to rate useful posts with the scrollbox below.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: