how to set HWIC-AP-AG to non-root with given SSID and NO security ?

Unanswered Question
May 26th, 2009

It seems I can't make an AP-AG installed on my router work as universal client with some given SSID (which by the way is working fine on a laptop with Ubuntu alongside the router set as same SSID with no security -is this what its called guest mode ?)

relevant commands following:

dot11 ssid whatever

authentication open

interface Dot11Radio0/1/0

description alternate uplink

ip address dhcp

ip nat outside




speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0



interface FastEthernet0/1

description IntraNet

ip address ...

ip nat inside


... when I set Dot11Radio0/1/0 to no shutdown the traffic activity LED on the C1841 goes crazy indefinetly, the radio shows channel locking, but it says it the remote AP is not responding ... given that my laptop can access and use this remote AP I presume I'm doing something wrong in the router configuration

system image is c1841-advsecurityk9-mz.124-22.T.bin

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion