cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
778
Views
0
Helpful
1
Replies

CSM bug

stephendrkw
Level 3
Level 3

CSCsk43903 -A pair of CSMs configured for fault tolerant operation will both enter the active state after 828 days, causing VIPs to be inaccessible. Fixed in 4.2(7).

I came across this bug which thankfully happened on a Sunday!

It's not clear wether the CSM requires rebooting to work around this bug before the 828 days expire or the switch chassis. Certainly the sh ver output from the switch showed exactly 828 days when I came across this problem.

I gather it's the CSM that requires rebooting, just want to be certain, anyone know? I have another pair of CSM's that come up to the 828 day limit(I'm not upgrading the code as yet, these CSM's will be replaced shortly)

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

This is a CSM issue.

So only the CSM needs to be rebooted.

BTW, there is a similar problem with probes as well.

Gilles.

View solution in original post

1 Reply 1

Gilles Dufour
Cisco Employee
Cisco Employee

This is a CSM issue.

So only the CSM needs to be rebooted.

BTW, there is a similar problem with probes as well.

Gilles.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: