paolo bevilacqua Wed, 05/27/2009 - 07:39
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You cannot do that if you don't have firmware files and a TFTP server, without these the telephone will become a brick once you enter the reset sequence.


sivaprakasam81 Wed, 05/27/2009 - 07:53
User Badges:

Thank you for the information. How can i take backup of the image (formware). I can use tftpd32.


Thank you

paolo bevilacqua Wed, 05/27/2009 - 07:56
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

There is no way to backup images from a cisco phone.


Please remember to rate useful posts with the scrollbox below.

sivaprakasam81 Wed, 05/27/2009 - 08:10
User Badges:

How do I get the firmware for the IP Phone? Is there any way, i can check the funcitionality of the IP phone without going through all these?



paolo bevilacqua Wed, 05/27/2009 - 08:13
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You need a support contract to download firmware from CCO.

Sorry, there is no easy way.

sivaprakasam81 Wed, 05/27/2009 - 08:18
User Badges:

I am not sure about the support contract on this product. What is going to happen by uploading the firmware? Can I just connect it to the Appropriate router/Switch and use the existing firmware verion.


Can you please name the router/switch is most compatible with IP phone 7960G

paolo bevilacqua Wed, 05/27/2009 - 08:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Be reassured that you don't have a support contract currently.


If you connect to a router and configure CME, you should be able to use current FW and do calls.


Any recent router can be used, ISR, 26xx, 36xx, etc.

sivaprakasam81 Wed, 05/27/2009 - 08:49
User Badges:

Thank you very much. Can I have some link to get resource for configuring CME on 26xx or 36xx router?



sivaprakasam81 Thu, 05/28/2009 - 05:17
User Badges:

Thank you So much for the support. Can I use 35xx Switch or 800 series router for CME configuration?

Actions

This Discussion