05-27-2009 07:55 AM - edited 02-21-2020 03:29 AM
Hi Guys ,
i'm having a problem in upgrade cisco pix 515e , the follow error appear :
"Can't open tftp client "
Anybody know causes of this error ?
thanks
Jorge
05-27-2009 09:44 AM
Jorge,
What are you typing to get this error message? You didn't give us much to go on :)
HTH,
John
05-27-2009 11:18 AM
Hi j.blakley
this that i typing :
wr net jorgef:63.txt
Building configuration...
TFTP write '63.txt' at jorgef on interface 1
tftp: out of states
Can't open tftp client
[FAILED]
Usage: write erase|floppy|mem|terminal|standby
write net [
thanks
05-27-2009 11:23 AM
Jorge,
You need to specify the ip address of your tftp server. If you're running a tftp server on your laptop, for instance, and your laptop's ip address is 192.168.1.50, then your command would be:
wr net 192.168.1.50:63.txt
If you don't have a tftp server, I recommend tftpd32.
HTH,
John
05-27-2009 11:52 AM
hi
same error :
wr net 10.198.50.16:63.txt
Building configuration...
TFTP write '63.txt' at jorgef on interface 1
tftp: out of states
Can't open tftp client
[FAILED]
Usage: write erase|floppy|mem|terminal|standby
write net [
jorge
05-27-2009 11:53 AM
Do you have a tftp server?
05-27-2009 11:57 AM
yes , i have a solarwinds in my pc . Others pix and routers i'm able to copy the configurations .
thanks a lot
jorge
05-27-2009 12:14 PM
Hmmm....try this (forgive the syntax if incorrect)
PIX(config)# tftp-server inside 192.168.1.1 63.txt
PIX# wr net
05-27-2009 12:28 PM
(config)# tftp-server spcbr 10.198.10.16 63.txt
(config)# wr net
Building configuration...
TFTP write '63.txt' at 10.198.10.16 on interface 0
tftp: could not open udp/0/12345/10.198.10.16/69
Can't open tftp client
[FAILED]
Usage: write erase|floppy|mem|terminal|standby
write net [
05-27-2009 12:32 PM
Jorge,
In one post you wrote:
Building configuration...
TFTP write '63.txt' at jorgef on interface 1
tftp: out of states
Can't open tftp client
[FAILED]
And in the last one:
TFTP write '63.txt' at 10.198.10.16 on interface 0
Is your tftp server on the outside of the pix or the inside of the pix? Do you have an acl on the interface that you're going out on?
05-27-2009 12:34 PM
outside the pix
thanks a lot
05-27-2009 12:35 PM
If you have an acl, try adding a permit statement for udp/69.
05-29-2009 05:47 AM
Hi guy , the problem is the pix , when try reload , appear the follow error :
"Currently writing image. Cannot reload"
Thanks a lot
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: