Begineer - How to configure 12 core switch 3750

Unanswered Question
May 27th, 2009

Please any1 help me im a beginner for cisco that i need to configure the 12 core switch 3750. how to assign ip address to the switch and assign vlan w/ ip address to each core. add vlan id and name. and if possible, if the same vlan id and vlan name configure both of them in 1 core?

Thanks in advance!!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
lamav Wed, 05/27/2009 - 09:35

You should read the configuration guide.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swuncli.html

Examples:

conf t

vlan 3

name MANAGEMENT_VLAN

vlan 4

name USER_VLAN

vlan 5

name USER_VLAN2

interface vlan 3

description ***Management Interface for Switch***

ip address 10.10.10.2 255.255.255.0

ip default-gateway 10.10.10.1

interface fa1/0/1

description user port

switchport

switchport access vlan 4

switchport mode access

no shut

These are just examples.

Victor

Leo Laohoo Wed, 05/27/2009 - 16:00

If you want the WS-C3750-12S to be the Master, then "switch 1 priority 15".

Actions

This Discussion