802.1X with IP Phone is posible with Nortel??

Unanswered Question
May 27th, 2009
User Badges:

Hello,


My Scenary is that I have configured 802.1X in Cisco Swithches C3750/C3560/C2960, I configured 802.1x in the all Switches, but i have 100 IP Phone Nortel with 2 ports one port connected to Switch and the other port connected to PC. I know that IP Phone Cisco work in the enviroment 802.1X, this feature i can configurate enable Radius (Cisco IOS/PIX 6.0) and in the group i have setup in the tab "[009\001] cisco-av-pairbut" put "device-traffic-class=voice" and in the tab IP Assignment i put "Assigned from AAA Client pool" in the case of Nortel how i do? is similar?? i have to setup in the "[009\001] cisco-av-pairbut" the same way??? and i've seen a configuration with cisco in the link:


http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml#MDA


and the other configuration with Avaya and Radius non cisco.


Please help me with this issue.


Best Regards


Alvaro



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jafrazie Wed, 05/27/2009 - 15:39
User Badges:
  • Cisco Employee,

From the backend perspective, you can treat Nortel and cisco phones identically in this regard.


The doc reference from before should work for any type of phone.


Hope this helps,

Actions

This Discussion