asa 5510 nat

Unanswered Question
May 27th, 2009
User Badges:

Hi, My asa device has 3 external ip address. On of the addresses is used for static pat to a host on the inside network. If a inside host tries to access the external resource not using the asa as the default gateway it works.If the inside client uses the asa as the default gateway it does not work.

Any suggestions appreciated.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bob.bartlett Thu, 06/18/2009 - 19:05
User Badges:

you need to have a nat and global configuration to tell the ASA to nat the internal resources and what address to nat them to

nat (inside) 1 0 0

global (outside) 1 xx.xx.xx.xx



This Discussion