Programming an auto-setup MeetMe speeddial

Unanswered Question
May 28th, 2009
User Badges:

Does anyone know if a way to pre-program a softkey or speeddial to automate the process of setting up a MeetMe conf bridge for a specified DN? So far, I've tried associating the MeetMe pattern DN(s) with an IP phone, but not having any success so far. I'm using UCCM 6.1.

Any ideas would be greatly appreciated. Thx.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Thu, 05/28/2009 - 06:23
User Badges:
  • Cisco Employee,
  • Hall of Fame,


Unfortunately that's not possible, meet-me requires you to press the meet-me softkey and then dial the DN.



if this helps, please rate

Pranjol Saikia Fri, 07/01/2011 - 04:57
User Badges:


The above requirement of starting the MeetMe conference through an external phone(PSTN) along with authentication,limit of users per conference and scheduleing feature IS POSSIBLE through an application and we have done it.

Lamar Demby Sun, 07/03/2011 - 07:07
User Badges:

Would love to know what application could do this and what I'd need to do to get it!


This Discussion