05-28-2009 09:51 AM - edited 03-15-2019 06:15 PM
Hi All,
How do I verify the following in 7960 IP Phone,
1. IP address of the phone
2. CME software version
3. Extension number
And how to access the GUI prompt of Cisco 7960 IP phone?
Thank you,
05-28-2009 10:45 AM
you can use show commands:
Commands: show ss7 sm set through shutdown (voice-port)
Cisco Unified CME Commands: sast1 trustpoint through show fb-its-log
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html
The whole config guide
Cisco Unified Communications Manager Express System Administrator Guide
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
To access phone GUI just type the IP of the phone in a browser
HTH
java
if this helps, please rate
05-28-2009 10:54 AM
Hi friend.
1. Settings->Network Configuration to check IP, Mask, Gateway, TFTP.
2. You can check only the firmware.
3. If the phone is configured, you can check directory number on the display of the phone.
To web access: http://IPPhone-IP
All the best
David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide