Richard Burts Fri, 05/29/2009 - 04:00
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Rupesh


It is my understanding that they really are the same. After introducing the feature Cisco changed the name in later releases as some additional functionalities were added. So the difference is versions of code where each is found.


HTH


Rick

Rupesh Kashyap Mon, 06/01/2009 - 20:50
User Badges:

I think u r right, as I m finding same command in both. RTR is new one.

Joseph W. Doherty Tue, 06/02/2009 - 02:36
User Badges:
  • Super Bronze, 10000 points or more

I thought RTR was the "old" and "SLA" the new?


[edit]


Above was based on my memory, but just found this reference: http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_book.html


If you look at some of the chapters, notes such as

"Note Effective with Cisco IOS Release 12.3(14)T and 12.2(31)SB2, the show rtr history command is replaced by the show ip sla monitor history command. Effective with Cisco IOS Release 12.2(33)SRB, the show rtr history command is replaced by the show ip sla history command. See the show ip sla monitor history and show ip sla history commands for more information. "

appear common (from: http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_04.html#wp1077354).

Actions

This Discussion