05-29-2009 03:53 AM - edited 03-04-2019 04:56 AM
I want block to Pc from communicating in the same vlan
05-29-2009 05:35 AM
Take a look at Private VLANs
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008013565f.shtml
or Protected Ports
Hope that helps.
05-29-2009 05:42 AM
Mac access list might also do the trick
Regards,
05-29-2009 01:50 PM
PVLAN are great for this purpose, just keep in mind that they area acting as L2..so if you are using SVI then you need ACL on top of PVLAN.
05-29-2009 11:58 PM
Depends on you switch model and IOS installed, you can use PVLAN as mentioned by Colin.
Here is the matrix of switches and IOS that supports PVLAN http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080094830.shtml
06-01-2009 10:06 PM
You can also use Vlan access-lists (VACL).
06-08-2009 03:07 AM
Hi jamada,
Can you Vacl configuration with an example.
06-28-2009 12:52 AM
Hello, thanks for start conversation, the post from the others budies was very usefull for me.
So I would like to ask if somebody test pvlan with catalyst 35XX or 29xX
I'll be expecting for your comments
Regards
Norman Santana
06-28-2009 02:33 PM
If you checked Danilo's link, you will notice that the 2900XL/3500XL cannot support PVLAN.
2900XL/3500XL also cannot support VACL.
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: