05-31-2009 07:00 AM - edited 02-21-2020 03:29 AM
Hi
I have CAM , CAS in Central, OOB,Virtual,Layer2 lab
I can see on CAM the access switch ports status which means that SNMP works but when a user is logged on the access switch , the user vlan is not inforced to be changed to Auth vlan
and he remains in the trusted vlan which is already configured on the acces switch
I can change in configuration on the switch through CAM but the CAM itself cant change Vlan
thanks to advise me what part i am missing
thanks
06-02-2009 12:26 AM
Please check the following items
a. configuring User Pages
b. configure VLAN Mapping
c. Configure Managed Subnets
d. Configure VLAN settings under Port Profiles
06-12-2009 07:21 AM
in the CAM, when you see the access switch ports status, click on the magnifying glass icon next to a port which is up and see if it's detecting the MAC address of the device which is connected to that port. If it is not it means that SNMP mac-notification is not configured properly. If CAM doesn't detect the MAC address of the device, it wont change the switchport vlan...
06-18-2009 08:22 AM
All access switch ports must be configured with only Auth VLAN (not access/trusted VLAN). Once the client is authorized, depending on the port profile, the CAM will instruct the switch (via SNMP) to change the port a trusted VLAN.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide