Auto Registration CUCM 6

Unanswered Question
May 31st, 2009


I have a CUCM version 6, and I have problem with the auto registration of the phones. The phone are not registered in the CUCM. I check this parameters:

Cisco Unified CM Configuration:

Auto-REgistration Information:

Starting Directory Number: 5000

Endind Directory Number: 5100

Partition : None

Uncheck the option "Auto - Registration Dissabled on this Cisco Unified Communication -Manager"

Cisco Unified Communications Manager GRoup Information:

Check the option: Auto-registration Cisco Unified Comunication Manager Cisco.

I need set other parameters to work the auto register option in my phones or restart any service??

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2 (1 ratings)
Jaime Valencia Sun, 05/31/2009 - 20:02

Where are the phones pointing to for the TFTP?

If you set them to look into that server where auto-registration is enabled does it work?



if this helps, please rate

ricardorojas123 Mon, 06/01/2009 - 05:13

Yes with DHCP configuration or IP Static Configuration the phone are registered. But this message is showed: "Registration Rejected : Error DBConfig" (The phone is not auto registered).


This Discussion