Auto Registration CUCM 6

ricardorojas123 · ‎05-31-2009

Hi.

I have a CUCM version 6, and I have problem with the auto registration of the phones. The phone are not registered in the CUCM. I check this parameters:

Cisco Unified CM Configuration:

Auto-REgistration Information:

Starting Directory Number: 5000

Endind Directory Number: 5100

Partition : None

Uncheck the option "Auto - Registration Dissabled on this Cisco Unified Communication -Manager"

Cisco Unified Communications Manager GRoup Information:

Check the option: Auto-registration Cisco Unified Comunication Manager Cisco.

I need set other parameters to work the auto register option in my phones or restart any service??

Jaime Valencia · ‎05-31-2009

Where are the phones pointing to for the TFTP?

If you set them to look into that server where auto-registration is enabled does it work?

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

ricardorojas123 · ‎06-01-2009

Yes with DHCP configuration or IP Static Configuration the phone are registered. But this message is showed: "Registration Rejected : Error DBConfig" (The phone is not auto registered).

Jaime Valencia · ‎06-01-2009

are there enough DLUs for the phones?

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

ricardorojas123 · ‎06-01-2009

Yes, there are DLU available.

ricardorojas123 · ‎06-01-2009

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080874bf1.shtml