IP comunicator over VPN

vjemin · ‎06-01-2009

Hi,

I have UCCM version 7.0, IP communicator version 7.0.2 and Check Point firewall for VPN. My IP communicator works fine when I'm in LAN.

When I connect through VPN, IP communicator is registered with UCCM. The IP address of IP communicator is the IP address of PC from VPN pool. But, when I call some IP phone in LAN (the phone is in the same LAN as UCCM), the phone ringing and when the phone goes off-hook, my communicator lose connection with UCCM and resets.

On CP firewall I got an error:

Illegal redirection 10.10.16.10->10.10.17.66.

10.10.16.10 is the UCCM server and 10.10.17.66 is the IP phone in the same VLAN.

What can be a problem?

Regards,

Vlaho

Dennis Mink · ‎06-01-2009

Mate,

when you ring your phone from IPcomm. you have two legs:

-Ip comm.-->CUCM

-CUCM--->LAN phone

when your lan phone goes off hook, the RTP stream between your 2 endpoint will be established.

My advise look at what your firewall is permitting regarding RTP between the relevant subnets

Please remember to rate useful posts, by clicking on the stars below.