CAT6500 does not display config

Unanswered Question
Jun 1st, 2009

any idea what this means?

coresw#sh run

Unable to read configuration. Try again later

the CPU of the 6500 is very low.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Mon, 06/01/2009 - 10:23

Hello Aaron,

there can be another telnet/ssh session where a sh run has been given and the session is stucked at a more prompt.

check with sh users if there are other sessions.

There is an option that provides exclusive access to running config.

Hope to help

Giuseppe

ronshuster Mon, 06/01/2009 - 10:33

I am not sure this is the problem as now I can see the config but it can take a few minutes until it pops up on the screen. The switch was rebooted 2 days ago.

Giuseppe Larosa Tue, 06/02/2009 - 00:49

Hello Aaron,

as noted by Leo you may be hitting a SW bug.

To help narrow the search more details are needed, if you can attach a sh ver and sh module

Hope to help

Giuseppe

Leo Laohoo Mon, 06/01/2009 - 13:36

Hi Aaron,

What's your IOS? Sounds like you've just hit an IOS bug.

Hope this helps.

ronshuster Tue, 06/02/2009 - 08:29

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXF7, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Thu 23-Nov-06 06:50 by kellythw

Image text-base: 0x40101040, data-base: 0x42D98000

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXF7, RELEASE SOFTWARE (fc1)

coresw uptime is 2 days, 5 hours, 53 minutes

Time since coresw switched to active is 2 days, 5 hours, 53 minutes

System returned to ROM by power cycle (SP by power on)

System restarted at 06:25:06 EDT Sun May 31 2009

System image file is "sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

cisco WS-C6509-NEB-A (R7000) processor (revision 1.2) with 458720K/65536K bytes

of memory.

Processor board ID FOX1022088D

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

SuperLAT software (copyright 1990 by Meridian Technology Corp).

X.25 software, Version 3.0.0.

Bridging software.

TN3270 Emulation software.

6 Virtual Ethernet/IEEE 802.3 interfaces

122 Gigabit Ethernet/IEEE 802.3 interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

Actions

This Discussion