MGCP Name Display with NI-1 using DMS-100

Unanswered Question
Jun 1st, 2009
User Badges:

MGCP PRI linked to Allstream. MGCP is configured DMS-100 Switch type while Alstream are using a DMS 500 emuling NI-1 swith type. Name display do comes out on Q931 Message out to Allstream.

But Allstream are asking for:

You need the plus/minus byte in front of the name. Nonetheless, NI2 will not work in the SS7 network. If they do change to NI-1 they must also add that byte. Example:DSP: ±DANIEL THOMPSON

I did attach the way the presentation is requested.

Is it compatible ? what can we do ?




plus---- + -----43--------2B------00101011


minus--- ± -----177-------B1------10110001

Note: If you get #NAME? in the hex and binary columns, go to Tools -> Add-Ins, and select "Analysis ToolPack"

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
javierrodriguez... Fri, 11/14/2014 - 07:53
User Badges:

I am not sure if you successfully fixed this. I am having the same issue in CUCM 9.1


This Discussion