Hi,
We just installed our new FWSM and attempted to upgrade ASDM. From the 6500, we can session into the FWSM but we CAN'T ping to it. Can anyone point out our configuration mistakes?
6500 running 12.2(33)SXH4:
<font face="courier">
interface vlan 400
ip address 10.4.4.3 255.255.255.248
no shutdown
</font>
FWSM:
<font face="courier">
hostname FWSM
names
!
interface Vlan400
nameif inside
security-level 0
ip address 10.4.4.1 255.255.255.248
!
ftp mode passive
access-list inside extended permit ip any any
pager lines 24
mtu inside 1500
no failover
no asdm history enable
arp timeout 14400
nat-control
access-group inside in interface inside
access-group inside out interface inside
route inside 0.0.0.0 0.0.0.0 10.4.4.3 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 1:00:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect skinny
inspect smtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:7c5bd4abd770cb0bb0014b584ec0c913
</font>
Thanks.
