877 & DMZ

Unanswered Question
Jun 2nd, 2009
User Badges:

I am configuring a 877 ADSL router. According to the spec pages it SHOULD support 2 VLANS - one for DMZ - with the base image. However whenever I try and add a VLAN I get a 'maximum number of VLANs reached' message and the VLAN isn't added. The unit has a fairly old software release (12.4(4)T) but I can't see anythingin the release notes for the newer images to suggest that there is a 'fix' in there...


From this page:

http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/product_data_sheet0900aecd8028a976.html

It says

"VLAN Support for 2 VLANs with Base Image. One VLAN dedicated to DMZ."


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jpoplawski Tue, 06/02/2009 - 06:19
User Badges:
  • Bronze, 100 points or more

I agree the documentation is misleading. I believe anytime we wanted to do more than two VLANs (outside/inside) we had to look at Advanced IP Services. I would download/install it to test and see if it works. If it does, work with your rep to back bill the client.


Hope this helps, rate if it does!

JB

Actions

This Discussion