WAAS Mobile - BrokenTCP

Unanswered Question
Jun 2nd, 2009
User Badges:

I try establish an connection client (with WAAS Mobile Client)/server (my application), but when I running WAAS Mobile I see in Wireshark the following: SYN->SYN,ACK->RST. The reset packet has the following:

Acknowledgment number: Broken TCP. The acknowledge field is nonzero while

the ACK flag is not set.

There isn't firewall between client and server. My particular application use port 81.

What is the meaning of this error and can you guide me on what I should

check because this is not working to only unique application?


João Paulo

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
tstanik Tue, 06/09/2009 - 07:56
User Badges:
  • Bronze, 100 points or more

proximity probe rtt method

To configure the primary and secondary methods to be used for proximity metric discovery, use the proximity probe rtt method command. The discovery method uses ICMP Echo requests or a TCP SYN, SYN-ACK, RST sequence to the configured TCP ports as the Round-Trip Time (RTT) discovery method.

proximity probe rtt method [icmp tcp|icmp|tcp icmp|tcp]


This Discussion