06-02-2009 09:35 AM - edited 03-17-2019 09:44 PM
Hi,
We have a IPVC-3515-MCU24 with software version 5.6 registered to a Cisco Gatekeeper (12.4(25)) We also have Tandberg MXP endpoints registered to this gatekeeper. The MCU is configured with a HD/SD Continuous Presence with 720p enabled.
The problem is that when we create a conference with any Tandberg endpoint the resolution never reachs 720p even when we have 2048Kbps.
The Tandberg endpoint is already set to use sharpness resolution.
Thank you in advance!
06-08-2009 12:17 PM
In the configuration of the Tandberg endpoints, under Endpoint configuration -> Call Quality -> AAC-LD should be disabled. Also, under Endpoint configuration -> Motion quality -> Natural Video threshold should be off.
Also reduce MTU size in MCU to 1400.
06-08-2009 01:19 PM
Hi. Thank you for your answer.
One more question, what is the maximum resolution that you can reach with Tandberg endpoints?
Now i have w480p MCU-->Endpoint and w280p Endpoint-->MCU using 512Kbps.
Thank you,
Fernando Cesar
06-11-2009 10:18 AM
where do you reduce MTU size in MCU?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide