c1721 with a WIC 1ADSL - PPPoE Trouble Configuration

Unanswered Question
Jun 2nd, 2009
User Badges:

I am having trouble to configure a c1721 with a WIC 1ADSL card.

Actually, I have a Cisco c827 working fine, but when I put the same configuration on the c1721, I am getting the message "01:40:23: Di1 DDR: Cannot place call, no dialer string set"

If I place the dialer string on the dialer interface, I get the message - "01:45:36: Di1: No free dialer - starting fast idle timer" either way I am getting

"01:46:06: Di1 DDR: cdp, 360 bytes, outgoing uninteresting (no list matched)" What sould I do? Thanks in advance.


This line only on the c1721.

dialer-list 1 protocol ip permit


Here is the configuration file:


version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname Maxirede-via-GVT

!

username jonas privilege 15 password 7 ******

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

ip subnet-zero

no ip domain-lookup

ip dhcp excluded-address 192.168.200.1 192.168.200.2

!

ip dhcp pool Maxirede

network 192.168.200.0 255.255.255.252

domain-name Maxirede

default-router 192.168.200.1

dns-server 200.175.5.139 200.175.89.139

lease 0 0 1

!

ip cef

ip ssh time-out 120

ip ssh authentication-retries 3

vpdn enable

!

vpdn-group pppoe

request-dialin

protocol pppoe

!

crypto mib ipsec flowmib history tunnel size 200

crypto mib ipsec flowmib history failure size 200

!

interface Ethernet0

ip address 192.168.200.1 255.255.255.252

ip nat inside

ip tcp adjust-mss 1400

hold-queue 100 out

!

interface ATM0

no ip address

no atm ilmi-keepalive

pvc 0/35

pppoe-client dial-pool-number 1

!

bundle enable

!

dsl operating-mode auto

hold-queue 224 in

!

interface Dialer1

ip address negotiated

ip mtu 1492

ip nat outside

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication pap callin

ppp chap hostname [email protected]

ppp chap password 7 ********

ppp pap sent-username [email protected] password 7 *****

ppp ipcp dns request

ppp ipcp username unique

!

ip nat inside source list 1 interface Dialer1 overload

ip classless

ip route 0.0.0.0 0.0.0.0 Dialer1

no ip http server

!

access-list 1 permit 192.168.200.0 0.0.0.255

!

line con 0

login local

stopbits 1

line vty 0 4

access-class 1 in

exec-timeout 0 0

login local

!

scheduler max-task-time 5000

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Giuseppe Larosa Tue, 06/02/2009 - 21:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Jonas,

this looks like a possible problem with IOS version on the C1721: a dialer string is needed for a dialer interface used for ISDN DDR.


However, I would move the configuration under an ATM point-to-point subinterface if supported:


int atm0

no ip address

no atm ilmi-keepalive


int atm0.1 point-to-point

pvc 0/35

pppoe-client dial-pool-number 1

!


if you do the following:


terminal monitor


debug ppp negotiation

debug ppp auth


then

conf t

int atm0

shut


! wait 60 seconds

int atm0

no sh


you can attach the output in a text file



As I've noted at the beginning this may be an IOS version issue.



Hope to help

Giuseppe


j.conceicao Wed, 06/03/2009 - 05:28
User Badges:

Hi Giuseppe


Thanks for your help!


Well I have changed as you asked for but it's still the same.


Thanks again,


Jonas


-------------------------->

Maxirede-via-GVT#sh deb

PPP:

PPP authentication debugging is on

PPP protocol negotiation debugging is on


shut

00:08:22: %LINK-5-CHANGED: Interface ATM0, changed state to administratively down

00:08:23: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to down


no shut

00:10:51: %LINK-3-UPDOWN: Interface ATM0, changed state to down

00:11:24: %LINK-3-UPDOWN: Interface ATM0, changed state to up

00:11:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up



---->

Maxirede-via-GVT#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-ADVENTERPRISEK9-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 17-Mar-08 14:24 by dchih


ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)


Maxirede-via-GVT uptime is 19 minutes

System returned to ROM by power-on

System image file is "flash:c1700-adventerprisek9-mz.123-26.bin"


cisco 1721 (MPC860P) processor (revision 0x200) with 61759K/3777K bytes of memory.

Processor board ID FOC07380ZCA (1056193944), with hardware revision 0000

MPC860P processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

1 ATM network interface(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)


Configuration register is 0x2102

Maxirede-via-GVT#

---->



The Configuration file:


Building configuration...

Current configuration : 1831 bytes

!

version 12.3

no service pad

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname Maxirede-via-GVT

!

boot-start-marker

boot-end-marker

!

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

no aaa new-model

ip subnet-zero

ip cef

!

ip dhcp excluded-address 192.168.200.1 192.168.200.2

!

ip dhcp pool Maxirede

network 192.168.200.0 255.255.255.252

domain-name Maxirede

default-router 192.168.200.1

dns-server 200.175.5.139 200.175.89.139

lease 0 0 1

!

no ip domain lookup

ip audit po max-events 100

vpdn enable

!

vpdn-group pppoe

request-dialin

protocol pppoe

!

username jonas privilege 15 password 7 ****

!

interface ATM0

no ip address

no atm ilmi-keepalive

dsl operating-mode auto

!

interface ATM0.1 point-to-point

pvc 0/35

pppoe-client dial-pool-number 1

!

interface FastEthernet0

ip address 192.168.200.1 255.255.255.252

ip nat inside

ip tcp adjust-mss 1400

speed auto

hold-queue 100 out

!

interface Dialer1

ip address negotiated

ip mtu 1492

ip nat outside

encapsulation ppp

dialer pool 1

dialer string 0,35

dialer-group 1

ppp authentication pap callin

ppp chap hostname [email protected]

ppp chap password 7 ***

ppp pap sent-username [email protected] password 7 *****

ppp ipcp dns request

ppp ipcp username unique

!

ip nat inside source list 1 interface Dialer1 overload

ip classless

ip route 0.0.0.0 0.0.0.0 Dialer1

!

no ip http server

no ip http secure-server

!

access-list 1 permit 192.168.200.0 0.0.0.255

dialer-list 1 protocol ip permit

!

line con 0

login local

stopbits 1

line aux 0

line vty 0 4

access-class 1 in

exec-timeout 0 0

login local

!

scheduler max-task-time 5000



j.conceicao Wed, 06/03/2009 - 08:21
User Badges:

Hi Guys,


I just downloaded the c1700-sy7-mz.124-25.bin and it is working.


Jonas

Giuseppe Larosa Wed, 06/03/2009 - 09:24
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Jonas,

nice to hear you have solved: so it was an IOS version issue as suspected.



Hope to help

Giuseppe


Actions

This Discussion