DHCP Snooping and DHCP Server

Unanswered Question
Jun 2nd, 2009
User Badges:

I have configured DHCP snooping in my network. Now my issue is that I'll be configuring one of the switch which has snooping enabled with dhcp pool so that the phones get the IP from the switch. I was not able to get any IP address from the switch. Is this because DHCP snooping is enabled. Any help would be greatly appreciated

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Tue, 06/02/2009 - 17:38
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

You must use the ip dhcp snooping trust interface configuration command on inter-switch links or switchports where DHCP servers are connected to.


HTH,


__


Edison.

nrramos Tue, 06/02/2009 - 19:09
User Badges:

I do have that configured on all the uplink ports. I have configured the DHCP pool on a switch. Could it be possible that the switch thinks its a rogue DHCP server handing out IP's and hence gets blocked ??

cisco_lad2004 Wed, 06/03/2009 - 02:37
User Badges:
  • Gold, 750 points or more

have you configured below as part of DHCP configuration ?

"no ip dhcp conflict logging"


Sam


Actions

This Discussion