ACE vip question

Unanswered Question
Jun 2nd, 2009
User Badges:

in ace configuration, we didn't config a vip interface or address,just creat a class map to match destination vip address. then we config loadbalance vip inservice to enable vip. but there is no vip address, how did ace enable vip inservic like CSS11500 or csm module does


thank you!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Gilles Dufour Wed, 06/03/2009 - 00:21
User Badges:
  • Cisco Employee,

did you assign the service policy to an interface ?


G.

fly Wed, 06/03/2009 - 01:10
User Badges:

you mean ACE read service policy (class map) to detemine the vip address.

i remember on CSS 11500, must define a vip address, and assigne a ip address to vip.

thank you!

Li

Amr-Ahmed Sun, 06/14/2009 - 05:41
User Badges:

Hi,


to make the vip inservice, you do this under the multi-match policy map, under the l3 class map.

Ex:


class-map match-all X-CM

match virtual-address 172.16.10.100 any


policy-map type loadbalance first-match X-L7PM

class class-default

serverfarm X-SF


policy-map multimatch SLB-SP

class X-CM

loadbalance vip inservice

loadbalance policy X-L7PM


Regards,

Amr Ahmed


Actions

This Discussion