regarding hwic-1fe on 2821

Unanswered Question
Jun 2nd, 2009
User Badges:

i have one 2821 router with latest ios 12.4.25a ,but when i install hwic-1fe the card not detected and card shows continues link .if ios is the problem so pls suggest the specific ios or other solution .

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 06/03/2009 - 01:04
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

You need a minimum IOS of 12.4(15)T to use this card -


http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html


Note that you 12.4 mainline will not do as support for this card was added in the T train.


Jon

mayankparekh13 Wed, 06/03/2009 - 01:26
User Badges:

thanks jon

as per your said ,i have only use t train ios for installation.



Regards

mayank

Joseph W. Doherty Wed, 06/03/2009 - 03:59
User Badges:
  • Super Bronze, 10000 points or more

BTW, because of the nature of the "T" train, you might want to avoid using a version higher than 12.4(15)T although you'll probably want to use the latest patch version, which I think is now T9 for 12.4(15)T.

mayankparekh13 Wed, 06/03/2009 - 20:55
User Badges:

thanks joseph,

i have download these 12.4.15t ,the required ios is 54 MB and in flash only 48 mb of free space after erase old ios .so pls give the solution for that

Leo Laohoo Wed, 06/03/2009 - 21:25
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Hi Mayank,


Easy solution to your lack of flash capacity. Go to your nearest electronics shop and purchase a CF no greater than 2Gb. Insert it and format the new CF before loading the IOS.


I've done this numerous times successfully.


NOTE: If you are interested, you can also boot from USB. (http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html)


Hope this helps.

Actions

This Discussion