06-02-2009 10:33 PM - edited 03-04-2019 04:58 AM
i have one 2821 router with latest ios 12.4.25a ,but when i install hwic-1fe the card not detected and card shows continues link .if ios is the problem so pls suggest the specific ios or other solution .
06-03-2009 01:04 AM
You need a minimum IOS of 12.4(15)T to use this card -
Note that you 12.4 mainline will not do as support for this card was added in the T train.
Jon
06-03-2009 01:26 AM
thanks jon
as per your said ,i have only use t train ios for installation.
Regards
mayank
06-03-2009 03:59 AM
BTW, because of the nature of the "T" train, you might want to avoid using a version higher than 12.4(15)T although you'll probably want to use the latest patch version, which I think is now T9 for 12.4(15)T.
06-03-2009 08:55 PM
thanks joseph,
i have download these 12.4.15t ,the required ios is 54 MB and in flash only 48 mb of free space after erase old ios .so pls give the solution for that
06-03-2009 09:25 PM
Hi Mayank,
Easy solution to your lack of flash capacity. Go to your nearest electronics shop and purchase a CF no greater than 2Gb. Insert it and format the new CF before loading the IOS.
I've done this numerous times successfully.
NOTE: If you are interested, you can also boot from USB. (http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html)
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: