VRF-Lite QOS on Ethernet Subinterfaces

Answered Question
Laurent Aubert Wed, 06/03/2009 - 06:12
User Badges:
  • Cisco Employee,

Hi,


Could you share your configuration ? it should work.


Thanks


Laurent.

Laurent,


Thanks for the reply.


Can you provide a link for the sample as I can't find any sample from CCO and what I found are all under Ethernet physical interface for VRF based QOS.


We can apply the QOS under subinterfaces for GSR PE router but the CE are 7206s.


We need to make sure it works before we create the temple for our IE.

Laurent Aubert Wed, 06/03/2009 - 07:32
User Badges:
  • Cisco Employee,

I was not able to find any useful link on CCO.


Could you post the error message and the service-policy you want to apply per subinterface ?


Thanks


Laurent.

Here is what I got from the 7206:


Router(config)#int f0/0.1

Router(config-subif)#ser

Router(config-subif)#service-policy ?

input Assign policy-map to the input of an interface

output Assign policy-map to the output of an interface


Router(config-subif)#service-policy output ?

WORD policy-map name


Router(config-subif)#service-policy output PIP-EMDC-BAKU-3400

CBWFQ : Not supported on subinterfaces

Router(config-subif)#


It is only expecting input or output not the policy map but is not taking it somehow.

Laurent Aubert Wed, 06/03/2009 - 10:07
User Badges:
  • Cisco Employee,

Ok so the link provided by Jon explains your issue and how to resolve it.


Let me know if you have other question regarding this non support of CBWFQ on subinterfaces.


Thanks


Laurent.

Actions

This Discussion