06-03-2009 06:48 AM
Hi Guys ,
How conect two routers or firewall over console port for manager ?
Thanks
Jorge
06-06-2009 03:48 AM
Hi Jorge,
I do not believe that you can connect to devices over console ports.
I have in the past connected from an aux port on a router to a console port on a switch using one of the old RJ45-RJ45 rollover cables Cisco used to ship with DB9-RJ45 adapters before they starting shipping DB9-RJ45 console cables.
You should be able to use the configuration in the document at the link below as a starting point.
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
This document is for a terminal server with 16 async ports. The config below should be ok for an aux port.
!
ip host switch 2001 172.21.1.1
!
interface Loopback1
ip address 172.21.1.1 255.0.0.0
!
line aux 0
session-timeout 20
no exec
exec-timeout 0 0
Please rate if helpful.
06-07-2009 03:01 PM
Hello, we are a group of purdue students that are doing a success case analysis over cisco as a company. We would really appreciate it if you take a few mintues to answer a couple of questions.
-Are you satisfied with the services provided with this company?
-What do you like/dislike the most about cisco?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: