ISDN Dialer backup question

Answered Question
Jun 3rd, 2009
User Badges:
  • Bronze, 100 points or more

Hello,

I don't have a lab environment available to test this at the moment, but I'm wondering...

If I have a dialer-list configured to look at an access-list to identify interesting traffic, if that access-list is not there, will the router just default to a permit any any similar to how it works if you apply a non-existant ACL to an interface? This should be a pretty easy one. Thanks in advance.

Correct Answer by Laurent Aubert about 7 years 11 months ago

Hi


Empty ACL is interpreted as permit any any or you will have an error message if the feature using it doesn't support it.


HTH


Laurent.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Laurent Aubert Wed, 06/03/2009 - 11:21
User Badges:
  • Cisco Employee,

Hi


Empty ACL is interpreted as permit any any or you will have an error message if the feature using it doesn't support it.


HTH


Laurent.

Actions

This Discussion