Recently we started to route all our outgoing National call though our carriers network to get cheaper calls. Since we rolled this out we have noticed that all these calls are routing across two sites before it leaves our network.
I have attached a screen shot of a diagram of the main part of our network.
We have a Cisco Call Manager 4.1.3(SR7) and there is a gateway created for these calls which I have also attached.
When I run a traceroute on the HQ Voice Gateway, the path to 184.108.40.206 router to the Router on HQ side of the 10MB leased line to the router on the Call Centre side of the leased line and then routes across the Call Centre to the Call Centre 10MB link to the Carrier Network. It does the same for the HA site.
I would like the traffic designated for the Carried network to leave the HA and HQ site without going through our Call Centre.
Where should I inject a route to make these call exit the network locally.
Thanks a million