06-05-2009 07:47 AM
Hi Techies,
I have a pix515 doing remoteaccess VPN. People are successfully able to VPN into the box but are not able to access resources on DMZ or the inside. DMZ is directly connected to the PIX and inside is behind a CSS.
Could you people point me in right direction please.
Thanks
Solved! Go to Solution.
06-06-2009 10:19 AM
Abdul, is your issue resolved , have you tried suggested statements missing in your config.. let us know if still issues.
Regards
06-05-2009 08:36 AM
Hi
you need couple of statements, should be fine after you add these .
nat (dmz) 0 access-list vpn-nonat
crypto isakmp nat-traversal 20
Let us know how works out.
Regards
06-06-2009 10:19 AM
Abdul, is your issue resolved , have you tried suggested statements missing in your config.. let us know if still issues.
Regards
06-08-2009 01:08 AM
Hi Jorge,
Thanks a lot for the reply. I was missing nat0 for dmz :-). It resolved the issue. Thanks again.
Abdul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide