Solved: antennas for 1242AG to run both A and G

Eric.Wang · ‎06-05-2009

hi!

I want to run 802.11A for VoIP and 802.11G for data WLAN.

1. do I need a pair of antennas for 2.4g and another pair for 5g HZ? four of them?

2. does AP support dual-bands at the same time?

scottmac · ‎06-05-2009

1) Yes. You need at least one for each band. Two is better for most implementations, for signal diversity.

2) Yes. There are two independent radios in the case, they operate with complete independence.

Good Luck

Scott

scottmac · ‎06-05-2009

1) Yes. You need at least one for each band. Two is better for most implementations, for signal diversity.

2) Yes. There are two independent radios in the case, they operate with complete independence.

Good Luck

Scott

Leo Laohoo · ‎06-05-2009

Cisco Aironet Antennas and Accessories Reference Guide

Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories

Hope this helps.

Leo Laohoo · ‎06-08-2009

Thanks for the rating.