Locked: line cons 0, login local

Unanswered Question
Jun 5th, 2009
User Badges:

Hi, on a 3750, if I do:

line cons 0

login local


Then I did not set any user name.


When I attempt to logon, it prompts for a username though.


What would be the username and password I should use in this case? Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Sat, 06/06/2009 - 02:07
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Marlon


You will need to create a username/password as there is no default as far as i know.


Jon

davy.timmermans Sat, 06/06/2009 - 02:35
User Badges:
  • Silver, 250 points or more

If you're not able to login via telnet password recovery is your only option.


Press on the mode button for 10seconds. The switch will reboot and rename startup (config.text.renamed)


When you're in privileged mode, you can do a copy config.text.rename run.


Now you can set a username and password.


The other way to do password recovery is pushing on the mode button while booting


>rommon mode



rommon1>flash_init

rommon2>rename flash:config.text flash:config.renamed


reset


en

copy

copy config.renamed run

username xxxx secret yyyy



Actions

This Discussion