VG248's & SRST

Unanswered Question
Jun 8th, 2009
User Badges:

Hi,


I am setting up a remote site, this will have two VG248's (approximately 80 ports used) and 30 7962's. I am planning on using SRST v4.3 for this. I am not sure if each device on the VG248 counts as a phone hence not sure what router to go for. I have tried searching for this information but can't seem to find it anywhere. Any assistance greatly appreciated!


Cheers,


Lewis

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Mon, 06/08/2009 - 04:26
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Lewis,


During Cisco CallManager fallback, Cisco SRST considers the Cisco VG248 to be a group of Cisco IP phones. Each of the 48 ports on the Cisco VG248 is treated by Cisco SRST as a separate Cisco IP phone.

From this good SRST Overview;


http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_over.html



Hope this helps!

Rob


Actions

This Discussion