Unanswered Question
Jun 8th, 2009

Hi, I need to create three V-LANS configured on Subinterfaces of FW which will be connected with L2 Switch and same V-LANS I will create on L2 Swicth. Should the connection between Switch and FW be in Trunk mode or if its not be in Trunk mode then may i know why as all V-LAN traffic goes by Trunk mode as I assume. Pls clarify. Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Marshall Mon, 06/08/2009 - 06:14


Yes, the switchport that the ASA connects into should be configured as an 802.1q trunk.


ray_stone Mon, 06/08/2009 - 06:22

And what about the port of Cisco ASA FW, it should also be configured in Trunk mode.


This Discussion