3660 router and vwic

cisco steps · ‎06-08-2009

I have a to replace a VWIC on 3660, who do I know if it is hot swappable or not,, Thanks

slmansfield · ‎06-08-2009

Cisco's recommendation is to turn off electrical power when replacing WICs on access routers.

Leo Laohoo · ‎06-08-2009

I agree with Susan. The 3600 does not understand "hot swappable".

cisco steps · ‎06-09-2009

I did both ,, turn off the router and hot swap ,,,I still getting up/down on s1/0 and and down /down on s1/1

R1#sho log

!

%CONTROLLER-2-FIRMWARE: Controller T1 1/0, firmware is not running

%CONTROLLER-2-FIRMWARE: Controller T1 1/1, firmware is not running

%CONTROLLER-2-FIRMWARE: Controller T1 1/0, firmware is not running

%CONTROLLER-2-FIRMWARE: Controller T1 1/1, firmware is not running

%CONTROLLER-2-FIRMWARE: Controller T1 1/0, firmware is not running

%CONTROLLER-2-FIRMWARE: Controller T1 1/1, firmware is not running

paolo bevilacqua · ‎06-09-2009

Get show diag, show ver and contact the TAC about this. You may need to RMA the VWIC.

cisco steps · ‎06-09-2009

already got one delivered this AM, I will install it and let you know / Thanks for the info..