06-08-2009 08:16 AM - edited 03-04-2019 05:01 AM
Which of the following ISDN PRI interfaces are capable for both voice and data:
NM-1CE1T1-PRI
HWIC-2CE1T1-PRI
VWIC2-2MFT-T1/E1
It would be installed on an 2801 router.
Solved! Go to Solution.
06-08-2009 11:03 AM
If I am not mistaken, of the three options only the VWIC is supported on the 2801. It is voice and data capable.
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
06-08-2009 01:39 PM
The VWIC supports ISDN for voice.
Remember you will also need PVDM2-xx.
No voice configuration can be done without it.
06-08-2009 11:03 AM
If I am not mistaken, of the three options only the VWIC is supported on the 2801. It is voice and data capable.
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
06-08-2009 01:36 PM
I have read that data sheet already, but I do not see any clear mention about ISDN.
06-08-2009 01:39 PM
The VWIC supports ISDN for voice.
Remember you will also need PVDM2-xx.
No voice configuration can be done without it.
06-09-2009 07:44 AM
You may need additional memory depending on how many modems you want. When I used the Dynamic Configuration tool I got this message:
Please refer to the DSP Calculator at the following URL to make sure you have selected enough PVDM resources: http://cisco-images.test.edgekey.net/cgi-bin/Support/DSP/dsp-calc.pl. Note, Cisco 2801 supports maximum 30 digital voice calls with VWICs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide