06-08-2009 08:16 AM - edited 03-04-2019 05:01 AM
Which of the following ISDN PRI interfaces are capable for both voice and data:
NM-1CE1T1-PRI
HWIC-2CE1T1-PRI
VWIC2-2MFT-T1/E1
It would be installed on an 2801 router.
Solved! Go to Solution.
06-08-2009 11:03 AM
If I am not mistaken, of the three options only the VWIC is supported on the 2801. It is voice and data capable.
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
06-08-2009 01:39 PM
The VWIC supports ISDN for voice.
Remember you will also need PVDM2-xx.
No voice configuration can be done without it.
06-08-2009 11:03 AM
If I am not mistaken, of the three options only the VWIC is supported on the 2801. It is voice and data capable.
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
06-08-2009 01:36 PM
I have read that data sheet already, but I do not see any clear mention about ISDN.
06-08-2009 01:39 PM
The VWIC supports ISDN for voice.
Remember you will also need PVDM2-xx.
No voice configuration can be done without it.
06-09-2009 07:44 AM
You may need additional memory depending on how many modems you want. When I used the Dynamic Configuration tool I got this message:
Please refer to the DSP Calculator at the following URL to make sure you have selected enough PVDM resources: http://cisco-images.test.edgekey.net/cgi-bin/Support/DSP/dsp-calc.pl. Note, Cisco 2801 supports maximum 30 digital voice calls with VWICs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: