06-08-2009 05:57 PM - edited 03-10-2019 04:39 AM
Hi, I've read that I must be running version 3.x of the subsys as opposed to the version 2.x to allow for using the Version 5 ips signatures.
My question is; How do I go about upgrading the subsys?
I have loaded 12.4.25a, but the subsystem is still showing 2.x.
I've found very little on this, is IOS-IPS used often by people, or do they prefer the hardware modules?
Any help much appreciated.
Solved! Go to Solution.
06-09-2009 05:51 AM
You need to run at least IOS Release 12.4(15)T3 or later to run the 5.x signatures, have a look at:
http://www.cisco.com/en/US/products/ps6634/prod_white_papers_list.html
Regards
Farrukh
06-09-2009 05:51 AM
You need to run at least IOS Release 12.4(15)T3 or later to run the 5.x signatures, have a look at:
http://www.cisco.com/en/US/products/ps6634/prod_white_papers_list.html
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide