Ciscoworks LMS 3.0.1 virtualization

Answered Question
Jun 9th, 2009
User Badges:

The server will be virtualized with the same features:

RAM: 4Gb

Processor: Intel Xeon 3.2 Ghz

HD: 140 Gb

I need to know if no problem with this kind of implementation.


Best regards,


thanks very much!


Correct Answer by Marvin Rhoads about 7 years 11 months ago

Virtualized OS support was not introduced until LMS 3.1. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/install/guide/prereq.html#wp1099303 for details.


Prior to LMS 3.1, you were limited to Windows Server Terminal Server installations for a "virtual" server.


If you are going to upgrade your LMS, also note that the latest release is LMS 3.2. Its relevant release notes section is here: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1103497


LMS 3.2 added Hyper-V in addition to VMWare as a supported virtualization environment.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Marvin Rhoads Tue, 06/09/2009 - 05:00
User Badges:
  • Super Silver, 17500 points or more
  • Cisco Designated VIP,

    2017 Firewalling, Network Management, VPN

Virtualized OS support was not introduced until LMS 3.1. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/install/guide/prereq.html#wp1099303 for details.


Prior to LMS 3.1, you were limited to Windows Server Terminal Server installations for a "virtual" server.


If you are going to upgrade your LMS, also note that the latest release is LMS 3.2. Its relevant release notes section is here: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1103497


LMS 3.2 added Hyper-V in addition to VMWare as a supported virtualization environment.

Actions

This Discussion